產品資訊 - laser tube cutter arylic paper plywood->handbag accessories

登入

加入會員

求助

ShiJiaZhuang Jing Hang Laser Technology Co., LTD.

回首頁

公司簡介

產品櫥窗

影音視聽

寄出詢問函

聯絡我們

	Recommended Results

laser tube cutter arylic paper plywood

產品分類 :

服飾及紡織->配件->包包配件

產品規格

Model No:	JH1050

Country	CN
Brand	JH
Packing	in wooden box
Minimum Order	1
Payment Term	L/C,T/T,Paypal,Western Union

產品描述

JH laser company have been produced and exported co2 laser tubes and relative products for  many years, JH laser tube is optical spares suitable for CO2  laser cutting machine, laser engraving machine, laser marking m achine, desk laser,  laser engaver.  Our laser tubes have significant cutting speed to cut wood, paper, arylic, colar board


     


co2 laser tube Usage


                                                                          


1) Make sure the electrode line is well connected, don`t make mistake with (+,-) electrode.


2) Connect the water cooling tube well; Connect with the regular of down-in and up-out, which input water from cathode and output water from the anode with no leak. Make sure the water is full in the storage, and there is no air bubble in the water-cooling tube before using (check each time before using).


3) Its better to fit self-checking equipment in water-cooling circulation system to avoid any trouble by the more heat which caused by lack of water. For details please consult the supplier of the co2 laser tube.


 


 


JH1050 Main parameters

<table class="MsoNormalTable ke-zeroborder" border="0" cellspacing="0" cellpadding="0" width="548" style="background:white;">
<tbody>
<tr>
<td width="225">

Model

</td>
<td width="323">

JH1050

</td>
</tr>
<tr>
<td width="225">

Length

</td>
<td width="323">

1000mm

</td>
</tr>
<tr>
<td width="225">

Pipe Diameter

</td>
<td width="323">

55±1mm

</td>
</tr>
<tr>
<td width="225">

Wavelength

</td>
<td width="323">

10.6um

</td>
</tr>
<tr>
<td width="225">

Catalyst coated

</td>
<td width="323">

Yes

</td>
</tr>
<tr>
<td width="225">

Output Power  
Stable Value

</td>
<td width="323">

60W

</td>
</tr>
<tr>
<td width="225">

Max Output Power

</td>
<td width="323">

85W

</td>
</tr>
<tr>
<td width="225">

Triggering  
Voltage

</td>
<td width="323">

26-28KV

</td>
</tr>
<tr>
<td width="225">

Working Voltage

</td>
<td width="323">

20-23KV

</td>
</tr>
<tr>
<td width="225">

Triggering  
Current

</td>
<td width="323">

4-5mA

</td>
</tr>
<tr>
<td width="225">

Max Working  
Current

</td>
<td width="323">

20mA

</td>
</tr>
<tr>
<td width="225">

Type Of Cooling

</td>
<td width="323">

Water-cooling 15-25℃

</td>
</tr>
<tr>
<td width="225">

Spot  diameter

</td>
<td width="323">

4±1mm

</td>
</tr>
<tr>
<td width="225">

Packing  size

</td>
<td width="323">

1200mmx160mmx150mm

</td>
</tr>
</tbody>
</table>

 

<h4 align="center" style="text-align:center;background:white;">
JH Laser Tube Operation Instruction 
</h4>

1.    Installation
Requirement


Make sure to
follow the operation instruction of JH Laser Tube as shown in the illustration. The
dedicated power P14 should be equipped. The positive pole of laser tube is in
high voltage (the ignition voltage is 24kv). It may cause the following
consequence when it is failed to follow the instruction: Arcing; the inner tube
will be punctured by electricity and may cause water leakage.


2.    Operation conditions


Water cooling:
using purified water; 3 to 5 liter/minute; water temperature: 10℃-40℃.


The operating
environment: temperature 2-40℃; humidity 10-60%.


The working
current: test current is 30mA. Maximum working current is 30mA. The running
current must be kept below 28mA. The life span can reach 10,000 hours if the
current is kept below 26mA. The ammeter must be connected to the negative
electrode of laser tube.


When it is
working under over-high current for long term, the negative pole will appear brown yellow, and the life span will be shortened
rapidly.


To protect dust
from going into the insulation sheath, please wrap it with plastic film.


3.    Working Performance


Cutting function.


Engraving
function: Very good. When the working current is 4mA and the tube is in the
state of  preionization,  the laser can be used for high-frequency
impulse engraving.


4.    Key Notes


Do not clean the
exterior surface of the output widow mirror with tools such as tampon;
otherwise the output power will be seriously affected. The followings are the
designated methods to clean up pollution in the exterior surface of window
mirror:


1) When the mirror
is polluted, do not turn on the laser.


2) Blow the mirror
surface sideways with an air blower.


3) Spray the pure
alcohol on the mirror surface with sprayer.


4) Turn on the
laser after the alcohol gets fully volatilized.


5) If the methods
above don't work effectively, it is necessary to ask for the professional to
use tampon with alcohol to clean the mirror surface from middle to edge. The
best solution is to prevent the window from being polluted.


 


Attention: it is
forbidden to clean the mirror with acetone.


The screws in the
front and back ends of the laser tube are not allowed to be moved, otherwise
the out power will be declined, even the tube will be scrapped.


Put the  acryl 300mm far away from output mirror,
when testing its laser spot. <a name="_GoBack"></a>


5.    Safety


The laser beam is
invisible light. Please wear protective glasses when debugging the laser. The
positive pole is in high voltage. Pay attention to the security marks. 


6.    Storage and
Transportation Requirement


Pour out cooling
fluid in the event of storage and transportation, and cover the output terminal
with a dust-proof plastic bag. The storage environment is 2-40℃, and the requested humidity is 10-60%.
Pack the laser as in the original way.


Important notes:
it is requested to use adhesive tape to cement the sponge together with laser
tube to prevent the tube from vertically sliding during transportation. The
sponge in the side of output mirror must be 70 mm beyond it, and the sponge in
the side of reflecting mirror must be 50 mm wider.


 


   Tubes
operated in wrong way are not guaranteed by Manufacturer.

 

 
jhlasertube.com

其他類似產品