產品資訊 - Pier Mobile Cranes Truck 2017->handbag accessories

登入

加入會員

求助

JINING FAR EAST ELECTRO MACHANICAL EQUIPMENT CO.,LTD

回首頁

公司簡介

產品櫥窗

影音視聽

寄出詢問函

聯絡我們

	Recommended Results

Pier Mobile Cranes Truck 2017

產品分類 :

服飾及紡織->配件->包包配件

產品規格

Model No:	FE-6B

Country	CN
Brand	FREMCO
Packing	nude packing
Minimum Order	1
Payment Term	L/C,T/T

產品描述

Pier Mobile Cranes Truck 2017



Mobile cranes generally can be divided into truck-mounted cranes (truck crane), tire cranes, off-road tire cranes, all-terrain crane, crawler cranes, special cranes. 6 tons crane is one type of truck crane, also named truck-mounted crane, truck-mounted hoist, mounted truck with crane. widely used in construction, resuce, power construction, power rescue, lifting material, logistic lifting and etc.


According the capacity, it divided into 16 tons crane, 12 tons crane, 10 tons crane, 8 tons crane, 6 tons crane and custom-made crane.



 


working
principle of pier mobile cranes: Inside the boom there is a rotating reel, which is wound around the rope and
the rope passes through the pulley on the top of the lower arm, pulls the upper
boom, and so on. When retracted, the reel retracts the wire rope and the boom
retracts under heavy duty. The rotary drum is driven by a hydraulic motor, so
you can see two tubing, but do not treat the cylinder. 



There are also some of the truck crane telescopic arm inside the installation
of a set of plunger-type cylinder, but this application is rare. Because the
multi-stage plunger cylinder is expensive, and the boom will be loaded when the
elastic bending, the life of a great impact on the cylinder.


The function of a Mobile Pier Cranes on a work site is not easily replaceable. Lifting very heavy objects high into the air and setting them into position can be difficult. The track crane can work well for this purpose; however, it is very slow-moving and limited to its location since it cannot be driven on a public road. The crane truck responds to these issues by placing the boom works onto a tire-driven truck chassis. This allows the truck crane to be given a quick lift to a work site and then driven to another site in a matter of minutes.


Cranes Pier Used is a kind of crane which is installed in the chassis of ordinary car or
special car, and the driving cab is set separately from the lifting control
room.This crane has the advantage of good maneuverability and rapid
transfer.The downside is that you have to have a leg to work, not to be able to
run on a load, or to work on a soft or muddy ground.The chassis performance of
the car crane is the same as that of the truck with the same total weight,
which is in line with the technical requirements of the road vehicle and can be
used on all kinds of highways.The crane is usually equipped with two control
rooms, and the legs must be kept stable when the operation is done.The weight
range is very large, can range from 8 tons ~ 1600 tons, the axle number of
chassis, can be from 2 ~ 10 root.It
is the largest and most widely used crane type.


 


·    Technical Parameter:


Model: FE-6B


Working parameter


Max lifting load:6 ton


Max lifting height: 32-36 m


Basic arm Max. load moment: 150 KN.m


Working speed


single rope Max. speed: 52 m/min


swiveling speed: 2.8 r/min


Rideability


Max climbing capacity:25%


Min. turning radius:9M


Max.travel speed:≤60 Km/h


Dimension parameter


Outer dimension:6.5*1.9*2.5 m


Outrigger span: 5.0*4.8 m


Chassis parameter


Model: 4B4-46M22


Power: 34 kw


 


 



Detail photos of Pier mobile cranes


<img title="Pier Mobile Cranes" alt="Pier Mobile Cranes" src="http://i.bosscdn.com/product/ec/8a/76/e62f86a6ee72a53c793d699248.jpg" /><img title="Mobile Pier Cranes" alt="Mobile Pier Cranes" src="http://i.bosscdn.com/product/f4/e7/19/ff241e19b873f21ebcad3eec7c.jpg" /><img title="Cranes Pier Used" alt="Cranes Pier Used" src="http://i.bosscdn.com/product/6e/13/0b/795b163508f93be8849d459ec3.jpg" />
machine-equip-manufacturer.com

其他類似產品