產品資訊 - Y83Q-6300C scrap metal shear baler->grease pressure cutting machine

登入

加入會員

求助

Jiangyin Merceko International Trade Co., Ltd.

回首頁

公司簡介

產品櫥窗

影音視聽

寄出詢問函

聯絡我們

	Recommended Results

Y83Q-6300C scrap metal shear baler

產品分類 :

機械與設備->液壓機與空油壓機->油壓剪裁機->油壓裁斷機

產品規格

Model No:	Y83Q-6300C

Country	CN
Brand	Wanshida
Materials	metal
Size	Customized
Color	Customized
Packing	wood packing
Minimum Order	1 set
Payment Term	T/T or L/C

產品描述

Our Y83Q-6300C scrap metal shear baler is designed for cold compaction of various thin metal materials with less than 4mm in thickness into rectangular bales at normal state, such as scrap steel, scrap iron, iron and steel scrap, and wire rod, etc. Furthermore, this metal scrap baling machine is capable of cutting the rectangular bales to a required length as per application needs. Also, it can shear steel sections that are not longer than 5m. Our scrap metal recycling equipment brings great convenience for storage and transportation of scrap metal, and simultaneously provides qualified furnace charge for metal smelting plants.

Technical Parameters:
Model:Y83Q-6300C
Cylinder pushing /shearing force:630 ton
Maximum working pressure:20MPa
Capacity:15-20 tons/h
Press room open size:6000x2500x795mm
Bale dimensions (LxWxH):(500-800)x800x(400-600)mm
Max scrap thickness:5mm
Cutting Speed:2-3 times/min
Hydraulic Oil Cooling system:Air cooling system
Motor:360kW
Baler dimensions (LxWxH):15500x29600x4150mm
Weight:110000KGS
Scrap size can be cut:
Square Steel: 100x100mm
Angle Iron: 180x180x15mm(3pcs)
Round Steel:D110mm
I Steel:320x132x11.5mm
Steel plate:30x450mm
Channel Steel: 320x90x10mm

Application:
This scrap metal shear baler is capable of cold pressing various thin metal materials with the thickness less than 3mm into rectangular bales at normal state, such as waste steel, scrap iron, wire steel, etc. Moreover, this machine will cut the rectangular bale into required length, including the steel section that is not longer than 5m. It makes the waste metal materials convenient for storage and transportation. This machine is also able to offer qualified furnace charge for metal smelting plant.
Features:
1. Our scrap metal shear baler is designed reasonably with compact structure. It is small and lightweight. Aside from small inertia of movement and low noise, this machine offers stable movement, flexible operation, low energy consumption, simple installation, safe and reliable performance, etc.
2. Under the integrated hydraulic and electrical control, it becomes user friendly and easy for overload protection.
3. This machine possesses a wide range of applications. It is able to work as processing equipment in metal recycling industry and smelting field.

Brief Introduction of Baling Process
When the clamping cylinder of the scrap metal shear baler works, the clamping head is perceived as the locking door, users have to put the waste materials for baling into the compacting box manually or mechanically. With the automatic start button pressed by hand, the left and right clamping cylinders start to work separately to move the left and right clamping board to the position for closing the compacting box. The pushing cylinder will move forward to press the waste materials into bales, accomplishing the baling task.
Next, the clamping head will be opened. The bale ejector will push the bale at certain distance for cutting with shear cylinder. This action will be repeated without stop until the bale is about 600mm long left. Then the cutting job is finished. When the clamping head works, the bale ejector turns back to its original position. After the left and right clamping boards are opened again, the automatic baling and cutting process is done.
The scrap metal shear baler will wait for another manual press on automatic start button to continue the work cycle. If it doesn't need to bale and cut any more, users can push the left 600mm bale out of the equipment by hand.

其他類似產品