產品資訊 - orthopedic fiberglass splint->medical glove

登入

加入會員

求助

Shaanxi Ansen Medical Technology Development Co., Ltd

回首頁

公司簡介

產品櫥窗

影音視聽

寄出詢問函

聯絡我們

	Recommended Results

orthopedic fiberglass splint

產品分類 :

服飾及紡織->手套和襪子->醫療手套

產品規格

Model No:	A315/325/415/420/425/430/535/545/635/645

Country	CN
Brand	Ansen
Materials	fiberglass or polyester fabric
Size	7.5 x 30cm--15 x 115cm centimeters
Weight	16.606kg--25.400kg
Color	various
Packing	customized
Minimum Order	2000
Payment Term	T/T

產品描述

Key Specifications/Special Features
Material: fiberglass or polyester fabric
Used for the external fixation of fracture and common orthopedics
Size: 7.5 x 30cm~15x115cm
Good X-ray radiolucency
High strength and lightweight
Good air-permeability
Easy to operate
Eco-friendly material
Good conformability and mold-ability
Operation:
Wear gloves and choose proper specifications
Use cast padding or stockinet on fixed part
Open bag and take out cast, Immerse in room temperature water at 4 to 6 seconds and press 2 to 3 times, take it out and squeeze out excess water
Wrap cast spirally according to need and keep proper tension
Wrap 2 to 4 layers at non-weight-bearing position and 4 to 6 layers at weight-bearing position
Shape wrapped cast according to need
Solidify time: 3 to 5 minutes, 20 minutes later cast reaches enough strength
Use electric cast saw to cut and remove it
Note:
Operator should wear gloves to avoid polyurethane touching and adhering skin
Open one bag at one time and use cast immediately
Don't open multi-bag at same time and so that to avoid weakening strength
Cast need to be cut and removed by electric cast saw
Pay attention to avoid breakage of bags during transportation and storage, for touching moisture in air can cause cast to solidify
Storage:
Be careful not to break the packaging
Storage at room temperature
Shelf-lift: 2 years
Packing: 10 bags x 6 boxes/carton; 12x 6 boxes/carton;5x 6 boxes/carton
Certification: ISO13485, CE and FDA