產品資訊 - LED Package Material (AP-G2550 with fluorescent powder)->LED Light

登入

加入會員

求助

Shenzhen Anpin Silicone Materials Co.,Ltd

回首頁

公司簡介

產品櫥窗

影音視聽

寄出詢問函

聯絡我們

	Recommended Results

LED Package Material (AP-G2550 with fluorescent powder)

產品分類 :

電子電工->聚光燈->LED燈

LED Package Material (AP-G2550 with fluorescent powder)

產品規格

Model No:	AP-G2550

Country	CN
Brand	Anpin
Materials	Silicone
Color	transparent

產品描述

Indroduction:
AP-G2550A/B is double component, heat-curing silicone elastomer material, used for LED packaging fill. After curing, it has high-light transmittance, good heat-stability, small stress, and low hygroscopicity etc...

Usage:
A: B=1: 1, add fluorescent powder according to the proportion, we suggest to use the planetary mixer to mix the A&B component, mixed prior to application, can only be used after you remove the bubble in the condition of 10mmHg vacuum under 60 degree. Please operate in dry and clear enviroment.

Attentions:
Some of materials, chemical, curing agent, plasticizer can control the gel material's curing. There are including:
1 organotin and other metallorganic compound
2 sulphur, polysulfide, polysulfone and other sulfur-containing
3 amine, polyester rubber and other ammoniac
4 phosphorig and other phosphorig-containing
5 Some flux residues
If any doubt that whether some kind of material would restrain the curing, we suggest a compatibility experiment test for the suitability.
If the uncured packaging materials exist the surface of the curing ones, then the curing incompatible, restrain curing.

Storage and transportation:
1 The preserve period is 6 months, and preserve in shade (above 25 degree) and keep it dry.
2 This product is nontoxic non-dangerous cargo, can be transport as normal chemical.
3 Be careful of the leakage during transportation, both of A, B silicone should be seal up.