產品資訊 - PBO Roller->aluminium extrusion press

登入

加入會員

求助

Telon Yida Co.,Ltd.

回首頁

公司簡介

產品櫥窗

影音視聽

寄出詢問函

聯絡我們

	Recommended Results

PBO Roller

產品分類 :

冶金礦產->重金屬->鋁擠件

產品規格

Model No:	11

Brand	Telon
Materials	PBO and KEVLAR
Size	100mm~2,500mm length millimeters
Weight	450g/㎡•mm
Color	Surface brown and yellow underneath
Payment Term	T/T or L/C bedore shipment

產品描述

When aluminum profile comes out of the extruder, the temperature is about 5500C and seldom felt can stand such high temperature for long time. PBO fiber is the kind of material that can resist high temperature up to 6000C. The needle-punched roller that combines PBO and KEVLAR layer is the ideal product to use for the extrusion initial area and run-out table.

It is the density of the PBO roller that decides its service life rather than the thickness. The high density PBO layer enables the roller to work continuously under temperature of 5500C, and at the same time to stand the abrasion from different shapes of the profile. For those not dense enough rollers, since the conjunction between PBO fiber and the KEVLAR fiber underneath is not strong enough, the exposed PBO layer is liable of wearing off quickly under constant abrasion, and once the PBO layer is over, the KEVLAR layer is not lasting for more than 15 days.
A metalloid fiber as PBO fiber is, the strength is extremely high (20 times of that of the steel), and therefore it is difficult to produce high-density rollers, e.g. needle breaking is the hardest rock to knock down in term of technology. TELONYIDA, however, with years of research and development, has completely mastered the craftsmanship with the subtle balance between the thickness and density of PBO layer.