產品資訊 - RTH 400 Automatic Hydraulic Honing Machine->cold forming

登入

加入會員

求助

Rektas Engine Reconditioning Machines

回首頁

公司簡介

產品櫥窗

影音視聽

寄出詢問函

聯絡我們

	Recommended Results

RTH 400 Automatic Hydraulic Honing Machine

產品分類 :

機械與設備->鋼、鐵加工機械->其他->冷軋

RTH 400 Automatic Hydraulic Honing Machine

產品規格

Minimum Order

100

產品描述

THE MAIN BODY IS MADE OF THICK SHEET-IRON AND PLATINUM-PLATE AND SLIDES OF CAST-IRON AND CAST-STEEL. OPERATION IS VIBRATION-FREE. THE TRANSMISSION MOUES UP AND DOWN AUTOMATICALLY. ROTATION OF THE SPINDLE IS OF TWO DIFFERENT TURN. THE ASCENDING AND DESCENDING SPEED OF THE SPINDLE COULD BE REDUCED DOWN TO ZERO. THE REGUIRED SPIRAL ADJUSTMENT IS AVAILABLE. THE HEAD-STOCK IS LOCKED MAGNETICALLY TO AVOAD FROM SPOILING THE SPIRAL-DESING LINES DURIGIN THE HONING OPERATION. EVEN IN HONING OPERATION, THE HEAD-STOCK PERFORMS AUTOMATIC SWITCH-ON-AND-OFF. WHEN REQUIRED, IT WORKS INTERMITTENTLY AT FREQUENT INTERVALS. THE MACHINE HAS A HYDRAULIC OPERATION MODE, WHICH ACHIEVES A QUIET AND SPEEDY FUNCTIONING

KOD NO RTH 400 TECHNICAL SPECIFICATIONS
LOGİTUDİNAL TRAVERSE OF HONING UNIT 700 mm
MAX. BORE DİAMETER 300 O
MİN. BORE DİAMETER 30 O
MAX. STROKE 400 mm
DİSTANCE BETWEEN TABLE AND SPENDLE Min.370–max.1200 mm
SPİNDLE SOEEDS-2 65-130 r.p.m.
SPİNDLE STROKE RATE STEPLESS VARİABLE Stepless (0.15mt/min)
TABLE SİZE 600 mm. X 1400 mm.
DİSTANCE TABLE MOTİON 1000 mm.
MAİN MOTOR (3. PHASE A.C.) 1.5 Kw
HYDROLİC POWER UNIT MOTOR 2 Kw
HYDROLİC POWER UNIT MOTOR 0.9 Kw
TRANSMİSSİON MECHANİSM MOTOR 0.75 Kw

DIMENSIONS
HEIGHT 1750 mm
WIDTH 2300 mm

LENGHT 1350 mm
WEIGHTS
WITHOUT PACKING 1050 kg

WITH PACKING 1150 kg