Carnivel Auto Co. – 線上商品櫥窗

登入

加入會員

求助

Carnivel Auto Co.

回首頁

公司簡介

產品櫥窗

影音視聽

寄出詢問函

聯絡我們

	Recommended Results

產品型錄

共4 筆產品

選取全部

全部取消

1. X-431 Heavy Duty/LAUNCH X431

X-431 Heavy Duty

Product description
Including all the advantages of its predecessor, X-431 Heavy Duty is designed to cover heavy duty diesel and gas-fueled vehicle models of 12V & 24V voltage. It features ergonomic design, compact structure, convenient use and strong expandability.

Product character
1. Compact and ergonomic design
2. Professional & durable tool
3. Covering heavy duty diesel and gas-fueled vehicle models of 12V & 24V voltage
4. No need for battery conversion when testing 24V trucks
5. Fast upgrading via the Internet to keep up with the latest vehicle models
6. International design to adapt to all diagnostic sockets
7. Including all the electronic control systems
8. Unique data transfer to ensure fast operation
9. Strong waveform display function
10. Integrated connector to offer great performance
11. Connection with PC to keep service records through optional X431 PCCENTER
12. Multi-language choice
13. Handwriting input on large touch screen
14. Large compact flash memory for data storage

2. TOYOTA KEY PROG OBD

TOYOTA KEY PROG OBD

the programmer design simple, and operate easily through OBD directly and no need to press any button. Support all Toyota 4D chips, with the original key programming protocol, non-general initialization protocol.

Safe and highly effective: Only about 10 second to program a new key; the anti-thelf system will not be damaged in safe using way, it is the most quickly and safest programmer.

The operating step as follows: ( read the using step and the importance notice carefully)

1,Turn the ignition on with the right 4D chip key.

2,Connect the programmer to the OBD port of the car, there are some short beep sounds after power on. When the connection with the Computer of car is done successfully, there is a long beep sound in 3 seconds, and the “LED” is on, as well as the anti-light “SEC”, which means the car is in the “key programming state”.
3,Take away the programmer from OBD
Matches 2 pcs main key and 1 pc vice-key to the IMMO computer Notice: 2 new main key and 1 vice-key are needed to close the programming procedure
Close all the car door.
Insert the first new main key to the ignition for 5 seconds.
Insert the other main key to the ignition for 5 seconds.
Insert the vice-key to the ignition for 5 seconds.
The new ignition key will be confirmed by the new IMMO.
Only program 1 or 3 main keys to the IMMO computer( Manual close the mode after complete the programming
Close all the car doors.
Insert the new key for 5 seconds.
Insert another new key for 5 seconds.
Take out the key from ignition
Insert the first programmed main key, and turn on the ignition for 5 times quickly, then take it out
the new ignition key will be confirmed by IMMO
Notice:
must use the right Toyota 4D chip, otherwise you take the consequences.
Don’t try to open the cover of programmer and dash board
This machine is only provided for the legal auto repair.
Otherwise you will take the above consequences.

3. DigiMaster II

Features
◆BMW 7 SER E65 CAS via OBD-II
◆newest types BMW 1/3/5/7SER and E87/E90/E91/E60/E6X/E66 CAS Via Cluster-Plug
◆BMW MINI SER(after 2003),Landrover SER cluster adjusting.
◆Mercedes Benz S/E/C SER cluster and (EIS) ignition module adjusting
◆BENZ W203/W211 cluster via cluster-Plug,no need to programme EIS
◆AUDI/VW/BENZ/BMW SER vehicles via OBD-II
◆Hyundai/Peugeot/Renault/Honda/Picasso (NEC CPU) cluster adjusting
◆MOTOROLA SER CPU programming.

Introduction
◆Digital odometer adjusting
◆Radio decoding
◆Airbag reseting
◆Immobiliser PIN code reading
◆ECU memory programming
◆Update through Internet
◆Support all kinds of latest vehicles.
◆Can view the pictures on Digimaster srceen directly

Properties
◆Local control:Touch-screen, Keyboard
◆Remote control: pc web link
◆LCD: 320*240 TFT real colorized srcreen
◆Port: USB port, series of adapter port
◆Power Supply: 12V DC
◆CF card: 1GB
◆Multi-Language for choose

4. benz IR smart key prog

IR smart key prog/benz IR smart key programmer

The new Mercedes device working with smart key (old and new) using in car since 1997 up to 2005 - without keylessgo system. You can program new key (ore used) in car and program oun key if its not work more.You read and program eeprom of CPU from Steering blocking module
Product description
The new Mercedes device working with smart key (old and new) using in car since 1997 up to 2005 - without keylessgo system. You can program new key (ore used) in car and program oun key if its not work more.You read and program eeprom of CPU from Steering blocking module via diagnostic connector (38 pins). Desolder and read via programmer two CPU from Electronic Ignition Control Module.Load theese eeproms to program. Desolder NEC CPU from the key.Soldering it on the device , select the No of key and program it. Solder all CPU on their places and start the car.
You can program new keys without the car - only with EIS and steering blocking module.You can read theese CPU with help programmer (for ex. ETL) for Motorolla CPU 68HC705X16(32).